Brand: D-Link
SWITCH D-LINK GIGABIT 10 PORTS DGS-1210-10/E
SWITCH D-LINK GIGABIT 10 PORTS DGS-1210-10/E
SKU:DGS-1210-10/E
Couldn't load pickup availability
With advanced Layer 2 management and Layer 3 functions such as Static Routing, the D-Link DGS-1210 Smart+ Switch range provides the most cost-effective solution for deploying managed networks in any environment.
Description
Advanced Layer 2 and Layer 3 Static Routing
The DGS-1210 Smart+ family is the only one in its segment with advanced management options, accessible through the Compact CLI interface or via Web-based UI to enable advanced network administration functionalities: VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, dual software images, and dual configuration files.
In addition, security features such as IGMP snooping, access control lists, port security, and D-Link Safeguard Engine technology protect data integrity (even more mandatory after the GDPR came into force) against malicious attacks such as denial of service, broadcast, multicast and unicast flooding.
Features
Compact CLI via Telnet: Supports Compact Command-Line Interface for advanced management.
Static Routing: Route Layer 3 traffic between switches, even if they are segmented into VLANs.
Fiber Optic Uplink: Increase connection distances with less interference and greater bandwidth using fiber optics.
Dual software images, dual configuration files: Risk-free firmware upgrades and configuration testing.
CCTV Video Surveillance Interface: D-Link's exclusive Surveillance interface is easy to use and offers optimal management of IP cameras and network video recorders.
Limited Lifetime Warranty: Register the product with D-Link and it will be fully protected with a limited lifetime warranty and/or replacement with an equivalent product after phase-out.
Technical specifications
| D-Link DGS-1210 Smart+ | |
| General | |
| Type | Smart Management |
| Layer | Layer 2 |
| Hardware version | F1 |
| Ports: | |
| 8 x 10/100/1000BASE-T | |
| 2 x 100/1000Mbps SFP | |
| Port standards | IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) |
| IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) | |
| IEEE 802.3u 100BASE-FX 100 Mbps (over fiber optic) | |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) | |
| IEEE 802.3z 1000BASE-X 1 Gbps (over fiber optic) | |
| IEEE 802.3az Energy Efficient Ethernet (EEE) | |
| IEEE 802.3x Flow Control | |
| Network cables | UTP Cat. 5, Cat. 5e (100 m max.) |
| Duplex mode: | |
| Full/Half-duplex for 10/100 Mbps | |
| Full-duplex for 1000 Mbps | |
| Media Interface Exchange | Auto MDI/MDIX for all twisted-pair ports |
| Performance | |
| Switching capacity | 20 Gb/s |
| Transmission method | Store-and-forward |
| MAC address table | 8K entries |
| VLAN group (maximum static) | 256 entries |
| Max. 64-byte packet forwarding rate | 14.88 Mpps |
| Packet buffer memory | 4.1 Mbits |
| CPU memory | DDR3 128MB |
| Flash memory | 32 MB |
| LEDs | |
| Power (per device) | Yes |
| Link/Active/Speed (per port) | Yes |
| Physical / Environmental | |
| Power input | 100 to 240 V AC 50/60 Hz universal internal power supply |
| Maximum power consumption | 6.33 W |
| Standby power consumption | 2.07 W |
| Noise | 0 dB(A) |
| Heat dissipation | 21.59 BTU/h |
| Fans | 0 |
| Operating temperature | -5 to 50 °C |
| Storage temperature | -20 to 70°C |
| Operating humidity | 0% to 95% relative humidity |
| Storage humidity | 0% to 95% relative humidity |
| Dimensions (Length x Width x Height) | 280 x 126 x 44 mm |
| Weight | 0.98 kg |
| Certifications: | |
| EMI | CE Class A, VCCI Class A, FCC Class A, BSMI, CCC |
| Safety | CB, UL, BSMI, CCC |
| MTBF | 1,380,058 hours |
Data sheet
| No. of Ports | 10 |
| Transmission | Gigabit 10/100/1000 |
Share
